HP EliteDesk 800 G1 Tower – 4th Generation available with Core i3 – i5 – i7 Processors


  • Motherboard Chipset Type: Intel Q87 Express
  • Support Core i3, Core i5 and Core i7 (4th Generation Processors)
  • Processor Socket: FCLGA1150
  • Ram (Memory) Type: DDR3
  • Ram Slots: 4
  • Include in Package: Casing, Motherboard, Processor Fan with heat-sink, Power Supply and DVD-Writer.
  • Processor, Ram, Hard Disk and other Accessories is not include in above mentioned price. Add them from the list given below.

Out of stock



HP EliteDesk 800 G1 Tower – 4th Generation available with Core i3 – i5 – i7 Processors is one of the smallest business computers on the market, yet it contains a configuration that can produce a high level of performance that’s more than capable of running everyday office tasks. This isn’t surprising considering it uses a mixture of notebook and desktop parts. It can be placed flat or vertical (with an optional base) on a desk, and even mounted on a stand or behind a monitor.

Its size is actually tiny, measuring only 77mm wide, 75mm deep, and 39mm high, and the box contains only the processing power and the storage. Much like a laptop, the power supply can’t fit into the body, and instead is an external adapter with a rating of 65W.

The CPU is an Intel Core i5-4570T, which is a desktop model that has two cores, Hyper-Threading, and a standard clock speed of 2.9GHz. It’s surrounded by 4GB of notebook-style DDR3 SDRAM, and there is a 2.5in, 500GB Seagate SSHD (solid state hybrid drive) for storage. All of this combines to make the EliteDesk 800 G1 run efficiently. Under a light load of basic Web browsing and word processing during our tests, the system consumed up to 14W, while it consumed approximately 35W when under a full processing load.

We saw a similar configuration in one of HP’s all-in-one desktop PCs, the ProOne 400, and the performance results we recorded for the EliteDesk are mostly on par with that system. In Blender 3D, a rendering time of 35sec was achieved, which is exactly the same as the all-in-one PC, while in 3DMark, the results from all the tests were slightly slower than what the all-in-one recorded (4550 in Cloud Gate and 2540 in Sky Diver, whereas the all-in-one got 4666 in Cloud Gate and 2553 in Sky Diver).

What these results mean is that you can use the EliteDesk 800 G1 without any problems for typical office tasks, be they producing spreadsheets and documents, running accounting software, or putting together presentations with lots of graphics. The system felt zippy overall while we used it, and its SSHD contributed to this, with regularly used programs such as Web browsers loading almost instantly. In CrystalDiskMark, the SSHD recorded a sequential read rate of 111.6 megabytes per second (MBps), and a sequential write rate of 104.7MBps. These results aren’t as quick as the hard drive in the ProOne 400 all-in-one, which was a non-hybrid, 7200rpm hard drive.

For a display, we used a Full HD AOC monitor, which we connected to the HP using a DisplayPort-to-HDMI adapter. It’s important to consider what adapters you’ll need for your monitors, in case they don’t have DisplayPort, which is the only digital output option on the EliteDesk. Since there are two DisplayPorts, you can easily use this PC with a dual monitor setup. There is also a VGA port in case you need to plug in an older display or to hook up to a projector. We also used the EliteDesk with a 4K LG TV, and expanded our desktop onto it at the native 4K resolution of that TV. While it was good for displaying 4K content that we shot with a digital camera, using a 4K TV screen as a computer display isn’t recommended due to its size. Get a proper 4K monitor instead, such as this Sharp.

The EliteDesk feels solidly built overall, despite having an access panel that’s easy to remove (just take off the thumbscrew and then slide the top panel and the face off towards the front). Once the panel is removed, it provides access to the 2.5in drive bay. The hard drive needs to be removed so that you can access the memory slots. You need to unplug the SATA cable and release the drive as you slide it out of its bay. Two SO-DIMM slots are located under it.

Additional information

Weight 15 kg